Powered mixer for live venues
The DAP PowerMix-2 is the bigger brother of the legendary PowerMix-1It combines the top features of the PowerMix-1 with more channels, more Auxiliaries and extra power. The DAP PowerMix-2 is the ultimate mixer for any live-venue, presentation, school, etc.6-10 Mono Channels, each channel with:• Microphone XLR input• Line Jack input• Insert• Gain (Trim) control• Voicing filter• Hi, Mid, Low EQ control -15 dB / +15 dB• Hi / Mid sweep 100 Hz -8 kHz• AUX-1 and AUX-2 (post-fade) control• 1x AUX-3 (pre-fade) control• 1x Monitor (pre-fade) control• Left / Right PAN control• PFL function• 60 mm stereo slider• Peak and Signal LED4 Stereo Channels, each channel with:• Mono Microphone XLR input• Stereo Line L / R Jack input (L=Mono L+R)• Trim (Gain) control• 3-band Hi, Mid, Low EQ control  -15 dB/+15 dB• AUX-1 and AUX-2 (post-fade) control• 1x AUX-3 (pre-fade) control• 1x Monitor (pre-fade) control• Left / Right Balance control• 60 mm stereo slider• Peak and Signal LED2 Digital Effect processors, • each channel with 16 pre-sets: Delay-1, Delay-2, Chorus-room-1, Chorus-room-2, Hall-1, Hall-2, Vocal cancel, Rotary speaker, Flange, Plate-1, Plate-2, Plate-3, Room-1, Room-2, Room-3 and Chorus.• Effect-1 & Effect 2 to AUX-3  send control• AUX-1 & AUX-2 send control• ON/OFF switch Effect-1 & Effect 2Master section, with:• Left & Right Graphic Equaliser  -12 dB / +12 dB• Feedback filter• AUX-3 pre/post• Pre-Fade switch• Headphone control• Effect -1 & Effect-2 to monitor control• AUX-3 Fader control • Mono (Monitor) out Fader• 2 Master-out fader (L + R)• 2x8 segment LED ladder for  output level display
Technical datas
Input sensitivity:Microphone (XLR): -52 dBu ~ -8 dBuLine (Jack): -34 dBu ~ +1 dBuStereo in: -14 dBu Power output:Main channel: 2 x 600W RMS / 4 Ohm 2 x 350W RMS / 8 OhmMonitor channel: 1 x 250W RMS / 4 Ohm 1 x 150W RMS / 8 OhmPower supply: Input voltage: 210~240V, 50 HzPower consumption: 700 W (max.)Dimensions: 540 x 520 x 210 mm (LxWxH)Weight: 26,6 kg